Version 06/21 Page 19 of 23 ICON 35 UM EN
13.2.3. Leg rests
Standard legrests
Aluminium with bolt fixation for length adjustment and flip-up footplate.
•
The legrests can easily be rotated outwards and detached. They may also be
rotated inwards under the seat to allow free leg room around the chair.
•
The legrests are height adjustable.
If the wheelchair is used outdoors, minimum
distance between footplates and ground should be 4-5 cm
•
To facilitate an easy transfer into or from wheelchair, the footplates can be easily
flipped up
(A)
WARNING! It is forbidden to stand on the legrests. It may cause the wheelchair to tip
over.
Adjustments of leg rests assembly
To swing away or detach the legrest:
•
Press the locking lever
(1).
•
Swing the legrest
(2)
outside to approx. 45
.
•
Then pull it up to detach from wheelcha
ir’s frame
(3)
.
To attach the legrest:
•
Hold it to one side, approx. 45
to a frame.
•
Insert the legrest’s tip into the hole on the frame
(3).
•
When the legrest hangs on the frame swing it to the
front
(2)
. The legrest should lock itself automatically.
•
Ensure that right and left legrests are assembled to
the correct side of the frame.
To adjust the height of the foot plate:
•
Loosen the locking bolt
(4)
.
•
Set the legrest length by moving the footplate
(5)
up
or down to the desired height (6 positions).
•
Put the bolt in the corresponding hole and tighten with
the nut
1
2
3
4
5
A
