Version 06/21 Page 16 of 23 ICON 35 UM EN
Adjustments of front caster assembly
When the position or the size of the rear or front wheels
is modified, it may be necessary to adjust the angle of
the caster to avoid “wheel flutter” and provide a smooth,
straight ride.
The head of the bearing house assembly
(1)
should
always be positioned at a 90
angle to the floor. After
changing the wheel set-up, adjustment of that angle is
necessary.
To adjust the angle of the bearing house:
•
Loosen the 2 bolts
(2).
Adjust the bearing house
assembly until the vertical axle of the bearing
house
(1)
is at a 90
angle with the floor
•
Add Loctite glue and re-tighten the bolt.
To modify the seat height, you can assemble the front wheels
in various positions
(3).
(In this picture a front fork with 5
different positions is used.) The various holes also allow
assembly of front wheels with different diameters.
WARNING! All above adjustments can only be done by
qualified service or advised by a physical therapist. For
detailed instructions contact Rehasense or the Dealer for
service questions.
Upholstery Seat & Back settings
– ICON 35Lx
The Lx is fitted with ergonomic seat & back upholstery which has stylish shape in dual colors and 3D mesh fabric. It
promotes pressure relief, air circulation and provides more comfortable seating position. It may be removed for
washing.
Seat & Back upholstery
•
To take off the seat upholstery, take the Velcro apart
(1)
and loosen bolts
(2)
at the left and right side.
2
3
2
1
90
1
