background image

Version 10/21 

Page  3 of 49 

PAWS UM EN 

1.

 

General Information, Intended Use and Quality Standards 

Thank you for choosing

 a PAWS Power Add-On Scooter for manual wheelchairs

. This User Manual contains detailed 

information on the device and important guidelines to ensure correct and safe usage.  

Please read this manual carefully

. It is especially important that you understand and follow the safety requirements. 

In this User Manual, we use the following terminology: - 

 

Device 

 refers to the PAWS Power Add-On Device 

 

User 

 refers to the person using the device 

 

Wheelchair 

 the wheelchair that is used with the device 

 

Kerb 

 

the edging of a pavement or sidewalk. Spelt “Curb” in Canada and the USA

 

 

Set-up 

 the way the device is configured according to User requirements 

 

Docking/Undocking 

 the process of connecting/disconnecting and lifting/lowering the device to the chair 

 

QR 

 refers to Quick Release between the clamp housing and the device proper 

 

Distributor 

 the authorised Distributor in the country of purchase 

The Manufacturer

 continuously develops its Devices and reserves the right to change specifications and functions 

without notice. 

If you have concerns or queries, please contact your Distributor directly. Contact details are located on the last page of 
this manual. 

Intended use and indications for use

 

Intended use: The Device is intended to be used as an auxiliary drive unit for folding and rigid frame wheelchairs. Any 
other use is prohibited. 

Indications: The device is indicated for individuals who require power assistance in propelling a Wheelchair in a seated 
position. Specifically, for those who: - 

 

have been instructed in its handling 

 

can move and coordinate both hands and arms without major restrictions 

 

have the physical and mental ability to operate the wheelchair and device in all possible situations 

Contra-indications: This type of device must not be used by persons with cognitive or processing limitations that would 
prevent them from using the device as intended.  

Use by people with partial or complete flaccid paralysis must be determined by a qualified wheelchair fitting expert with 
advice from a physician and/or occupational or physical therapist. 

The ability to safely control the device is essential to its use.  

Wheelchair pairing: It is important that the Wheelchair used can withstand the forces generated by clamping and driving 
with the Device. Significant stresses may be applied to the Wheelchair beyond that intended by its original design. 
Please consult with the supplier of the Device before changing to wheelchairs other than that to which the device was 
fitted at the time of delivery. Consult 

your Authorised PAWS Distributor for interface options for fibre composite 

frames.

 

Quality standards 

The Device has passed all necessary tests and thus conforms with the following European Standards: 

ISO 14971 ; ISO 20417 ; EN 12184 ; EN 12182 ; ISO 7176 -Part 1, 2, 3, 4, 5, 8, 9, 10. 

Содержание City 12


















































Отзывы: