Version 10/21
Page 13 of 49
PAWS UM EN
8.
Reuse
PAWS may be used by another person if required, but it must undergo technical inspection by an authorized
specialist/Distributor before transferring to a new User, in accordance with the "MAINTENANCE" chapter. The device must
be set up for the new User
’
s abilities and needs. All functional areas must be checked
–
especially the handlebar controls.
In addition to
processes described in the “CLEANING”
chapter, the device should be disinfected using generally available
disinfectants without chlorine and phenol. The manufacturer is not responsible for damage caused by use of disinfectants
.
9.
Warranty and Liability
PAWS is a Powered Drive System designed to connect to the front frame of a manual wheelchair.
IMPORTANT SAFETY INSTRUCTIONS
The information below is essential for the safe setup and use of the PAWS system.
To maximize user safety when using a PAWS device with a wheelchair, the following elements are essential::
•
Reading the User Manual
•
Correct fitting and setup by a trained Product Specialist
•
Instruction on correct use by a trained Product Specialist
•
Maintenance being completed within required service intervals
Warranty
PAWS comes with a 24-month Warranty for all parts (except Battery) against manufacturer defect or faulty materials. The
Battery comes with a 12-month Warranty against manufacturer defect or faulty materials.
It is a back to base Warranty and is managed via the Distributor.
It is a limited liability Warranty and does not cover damage to third-party wheelchairs.
PAWS Power Drive Systems and Wheelchair Compatibility
Wheelchairs are designed to safety standards that define how stable and durable they must be to ensure safety
throughout a typical usage lifecycle (ISO 7176:1-20). This standard is written to simulate typical use with reference to
manual propulsion and is tested to simulate a lifespan covering 350 km of travel.
Using a wheelchair with a Power Drive System may expose it to wear and tear far exceeding that experienced over a
typical wheelchair’s lifespan
. Regular use with a Power Drive System over unsealed terrain and over extended distances
may accelerate wear of critical wheelchair parts.
It is important that the user contacts their wheelchair manufacturer/supplier to confirm the wheelchair Warranty
conditions and service requirements for use with a PAWS Powered Drive System.
Compatibility & Connection Table (CCT): Main Side or Anterior Wheelchair Frame Tube Connection
Parameters
Round Tube Diameter
Min: 19.0 mm - Max: 40 mm
Minimum Wall Thickness
1.2 mm
Tube Materials
High-grade Aluminium alloy - 6061-T6 or 7005-T6
Titanium alloy (TiLite)
Clamping points width range
230 mm - 530 mm (according to adaptor chosen)
Straight Tube Section for
Clamping
Minimum 50 mm, without bends.
