Rehan Electronics i-Reader 2, Руководство пользователя

Страница: 10 / 18

10 i-Reader 2
9 Start mode
The Start mode is the mode the i-Reader 2 starts in when you turn the device on. In this
mode you can have the following controls:
Scan document
Switch on the device and put the camera in reading position. Align your document with the
document placement markers. Press the PLAY button to scan the document. The device
will sound a capture sound and starts ticking to indicate it is processing the document.
Press the STOP button to cancel processing. Once scanned, the read aloud mode will
start automatically. See
Chapter 10 Read aloud mode
for more information.
Save document
Press the PLAY and STOP buttons simultaneously to scan and save a document on the
internal storage. Follow the device instructions to scan multiple pages if you so desire.
Open document browser
Press the LEFT and RIGHT buttons simultaneously to open the document browser. See
Chapter 11 Document browser
for more information.
Change system language
Press the STOP and UP buttons or STOP and DOWN buttons simultaneously to change
the system language.
Change system voice
Press the STOP and LEFT buttons or STOP and RIGHT buttons simultaneously to change
the system voice.
Turn automatic language detection on or off
Press the UP and DOWN buttons simultaneously to turn automatic language detection
on or off. If this is turned on, the device will process the text and read it in the observed
language of the document. If this is turned off, the device will process the text according to
the selected system language and system voice. If automatic language detection fails, turn
automatic language detection off.
Scan document in column mode
Press the PLAY and LEFT buttons simultaneously to scan the document in column mode.
Use this if the device doesn’t read documents such as invoices or bank receipts as
expected.
Open menu
Press the UP and LEFT buttons simultaneously to open the menu. The menu allows you to
check the software version, set the date and time and reset the device to factory defaults.
See
Chapter 12 Menu
for more information.