1.
How to thread / replace the pulley rope
Picture 1
Picture 2
Picture 3
Thread the rope in the following manner:
1. Bring the rope through the upper flopper, front to back. Bring the rope up and over the stationary wheel
on the rope adjustment bar (as shown in picture 1).
2. Bring the rope down to the top weight and pull it through the right-most wheel front to back, as shown in
picture 2.
3. Then bring the rope up to the top and pull it through the right most wheel, back to front. Repeat this
procedure by bringing the rope down to the top weight pulling the rope through the center wheel, front to
back. Back up to the top, back to front on the center wheel. And then do the same procedure for the left-
most wheel.
Picture 4
Picture 5
4. Coming off the left-most wheel, bring the rope all the way down to the lower glider and bring the rope
around (back to front) before bringing the rope up to the lower flopper on the upper glider. Bring the rope
through the flopper (back to front) as shown in picture 5.
