25
Please note:
Check the position of the handlebar for the individual usability for the user.
Adjustment is possible using different deep slots in the tube frame and subsequent correction of the
swivel unit in accordance with the above point.
Positioning and tightening of the limiting rings.
Now tighten the precisely centrally aligned connection clamp piece in the middle of the tube joint
with the four lubricated M6 Allen screws in small, uniform increments, mutually cross-wise. Again, be
sure that the gap is uniform.
Remove the 40 mm base and check the free rotation of the steering wheels.
14)
Making fine adjustments when inserting and removing the adapter unit.
Remove mySKATE and, if necessary, after opening the clamping piece, correct the plane-parallelism or
the width of bends using a soft-faced hammer. Finally, tighten all screws cross-wise step by step. Do
the same for the grub screws of the swivel unit.
