3
│
1 - Description
PS 80 ZC Wall-hung thermal store is designed for storing and subsequent distribution of heat/cold. It is suitable as
a buffer tank for inverter heat pumps to ensure sufficient water volume during evaporator defrosting. The tank has
four G 1ʺ M connections to connect sources of heat/cold and a heating/cooling system. It comes with vapour-proof
non-detachable insulation and parts for hanging the tank on a wall.
When needed, an electric heating element without thermostatic head of max. 7.5 kW output can be installed into
the tank, for codes see the Catalogue.
1.1 - Tank protection
The inner surface has no surface finish, no anticorrosion protection. On its lacquered outer surface there is a hard
PU foam insulation covered with alacquered metal sheet.
1.2 - Connection points on the tank
4x G 1“M connection for connecting a heat/cold source and a heating/cooling system
1x G 1/2“ F connection for an air vent valve
1x G 6/4“ F connection for an electric heating element
2x sensor sheaths, diam. 12.6 mm
1.3 - Packaging
The tanks are wrapped in foil and delivered in a box filled with polystyrene.
2 - General Information
This Manual is an integral and important part of the product and must be handed over to the User. Read carefully
the instructions in this Manual as they contain important information concerning safety, installation, operation and
maintenance. Keep this Manual for later reference. Installation may be done only by qualified staff in compliance
with valid rules, standards and Manufacturer‘s instructions.
This appliance is designed to accumulate and distribute heat/cold. It shall be connected to a heating/cooling system
and sources of heat/cold.
Using the tank for other purposes than stated in this Manual (e.g. as a hot water storage tank) is forbidden
and the manufacturer accepts no responsibility for damage caused by improper or wrong use.
