3
│
1 - Description
The wall-hung thermal store PS 80 Z is intended for storing and subsequent distribution of thermal energy. It is
suitable as a buffer tank for inverter heat pumps to ensure a sufficient volume of water for defrosting the evaporator.
The tank has four G 1“ M connections for connecting a heat source and a heating system. It comes with insulation.
If needed, an electric heating element without a thermostatic head can be installed in the tank, 7.5 kW max. output,
for codes kindly consult the Catalogue.
1.1 - Tank protection
Its inner surface is without surface treatment and anti-corrosion protection. Its painted outer surface is fitted with
insulation made of hard PU foam that is covered with lacquered sheet metal.
1.2 - Connection points on the tank
4x G 1“ M connections for connecting a heat source and heating system
1x G 1/2“ F connection for air vent valve
1x G 6/4“ F connection for installing an electric heating element
2x sensor sheaths ø 12.6 mm
1.3 - Packaging
Tanks are packed in foil and supplied in a box filled with polystyrene.
2 - General Information
This Operation Manual is an integral and important part of the product and must be handed over to the User.
Read carefully the instructions in this Manual as they contain important information concerning safety, installation,
operation and maintenance. Keep this Manual for later reference. The appliance shall be installed by a qualified
person according to valid rules and Manufacturer‘s Instructions.
This device is designed to store heat in heating water and its subsequent distribution. It must be connected to a
heating system and heat sources.
Using the thermal store for other purposes than above described (e.g. as a hot water storage tank) is
forbidden and the manufacturer accepts no responsibility for damage caused by improper or wrong use.
