│
2
CONTENTS
1 Description ....................................................................................................................................................
2
1.1 Models ...............................................................................................................................................
2
1.2 Tank Protection ..................................................................................................................................
2
1.3 Thermal Insulation .............................................................................................................................
2
1.4 Connection points on the tank ...........................................................................................................
2
1.5 Packaging..........................................................................................................................................
2
2 General Information ......................................................................................................................................
2
3 Dimensions and Other Technical Data ........................................................................................................
3
4 Operation........................................................................................................................................................
5
5 Typical Layout Example with Thermal Store ..............................................................................................
5
6 Installation and Commissioning ..................................................................................................................
6
6.1 Connection to heat sources ..............................................................................................................
6
6.2 El. heating element installation .........................................................................................................
6
6.3 Commissioning ..................................................................................................................................
6
7 Installing Insulation on the Tank .................................................................................................................
6
8 Maintenance...................................................................................................................................................
8
9 Disposal .........................................................................................................................................................
8
10 Warranty .........................................................................................................................................................
8
1 - Description
PS E+ Thermal Stores are intended for storing and subsequent distribution of thermal energy from solid-fuel fired boi
-
ler. 230V or 3x230V/400V heating elements (2-12 kW output) can be installed directly into the 6/4” connections. Tanks
are fitted with four side connections, one top connection and two connections for sensor sheaths. A 100mm thick
insulation for these tanks can be purchased as a separate item.
1.1 - Models
Five models of 473, 756, 927, 1038 and 1260 l capacity.
1.2 - Tank protection
The inner surface has no finish, no anticorrosion protection, the outer surface is lacquered in gray.
1.3 - Thermal Insulation
Thermal insulation is available as a separate item. For easier handling, the insulation shall not be fitted on the tank
until it reaches its definite place of installation. The insulation is made of fleece, 100 mm thick, with a hard polystyrene
surface. It is closed by a quick lock.
1.4 - Connection points on the tank
4× side connections, G 6/4“ F thread
1× top connection, G 6/4“ F thread
2× side connections for sensor sheaths, G 1/2“ F thread
1.5 - Packaging
Thermal stores are delivered standing, each screwed to its separate pallet, packed in bubble wrap.
2 - General Information
This Manual is an integral and important part of the product and must be handed over to the User. Read carefully the
instructions in this Manual as they contain important information concerning safety, installation, operation and mainte
-
nance. Keep this Manual for later reference. The appliance shall be installed by a qualified person according to valid
rules and Manufacturer‘s Instructions, otherwise the Warranty is null and void.
This appliance is designed to accumulate thermal energy of heating water and distribute it subsequently. It must be
connected to a heating system and heat sources.
Using the thermal store for other purposes than above described is forbidden and the manufacturer accepts
no responsibility for damage caused by improper or wrong use. The thermal store must not be used as a hot
water storage tank!
