16
2.13. Operating
data
All temperatures, pressure, most important heat pump temperatures and states and controller
output values are displayed here for the user.
An
E
letter at the end of the temperature sensor line means that the given temperature sensor
is outside its permitted working range and it is necessary to check this sensor and its
connection and correct the fault.
2.14. Other
Website password reset
.................................... Controller website username and password reset for User level (select
reset). By resetting the default values are set (username: user,
password: user).
Lang. of heat pump state and error email language
.................................... Selection of the language in which the heat pump statuses, sensor
names, blocks and system faults will be displayed on the display and
on the web.
2.15. Time and date setting
Time and date shall be set to ensure proper operation of time programs (zones, recirculation,
DHW heating etc.). Clock is set in 24 hour format.
If the controller is connected to the Internet, the date and time are automatically updated every
hour using NTP time servers..
After time and day are set, pressing
key will show the display:
When this display appears, the time and date will be stored in the controller memory.
