Regner RA MINI Series, Руководство пользователя

Страница: 11 / 12

11
Excessive
electricity
consumption. 1.
Misalignment
or overload in
application A. Align or
reduce load.
B. Try to run
the actuator
without load.
C. Please
contact
REGNER®.
Motor runs but
spindle does
not move. 1. Gearing
system or
spindle
damaged. A. Please
contact
REGNER®.
Actuator
cannot lift full
load. 1.
Misalignment
or overload in
application
2. Insufficient
power supply.
3. Current cut
off (overload
in the
application).
4. Motor is
damaged.
A. Wait 5
minutes to
reset the
overcurrent
protection
system.
A. Align or
reduce load.
B. Check the
power supply.
C. Please
contact
REGNER®.
Motor runs too
slowly, does not
run with full
force or runs in
smaller steps. 1. Load is
higher than
specified.
2. Voltage
drop in cable
(long cables
may affect the
performance).
3. Current cut
off (overload
in the
application).
A. Wait 5
minutes to
reset the
overcurrent
protection
system.
B. Reduce load.
C. Check
power supply.
Actuator(s)
cannot hold the
chosen load 1. The load is
higher than
specified. A. Reduce
load.
08. Application policy
The purpose of the application policy is to define
areas of responsibilities in relation to applying a
REGNER® product related to a customer application.
REGNER® products are applicable for a wide range of
applications (including healthcare, household equi-
pment, and industrial areas). REGNER® cannot know
and check all the conditions under which REGNER®
products will be installed and used. So the suitability
and functionality of the REGNER® product and its
performance under different conditions can only be
verified by testing, and shall ultimately be the
responsibility of the REGNER® customer using any
REGNER® product.
REGNER® shall be responsible solely that REGNER®
products comply with the specifications set out
by REGNER® and it shall be the responsibility of
the REGNER® customer to ensure that the specific
REGNER® product can be used for the application in
question.
09. Contact
For technical assistance get in touch with the
REGNER® technical department through the
following e-mail:
info@regner.es
.
RA MINI IN-LINE ACTUATOR SERIES