1
2
www.regentlight.co.za
www.regentlight.co.za
INSTALLATION INSTRUCTIONS
ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN
1
2
PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.
DO NOT CONNECT THE LUMINAIRE LIVE
Bilux Inground
Ø90mm
Hole diameter
145mm
Hole depth
Ensure there is a drain under the
substrate when installing the tting into
paving or cement
Drainage detail spec by Civil
Engineer.
2. Create a cavity for tting in the
ground/paving at the required position.
NB: GRAVEL FOR DRAINAGE:
Lay at least
50mm of
13mm or 19mm Chip Stones
beneath the well of the cavity and
check drainage efciency.
DRAIN
GROUND
PAVING/
CEMENT
13/19mm Chip
Stones
3 - 13 MAIN REEF SERVICE ROAD, CORNER
SPRINGBOK AND MAIN REEF ROAD, INDUSTRIA,
JOHANNESBURG. SOUTH AFRICA.
TEL : +27 11 474 0171
www.regentlight.co.za
REGENT LIGHTING A DIVISION
OF WAHL INDUSTRIES.
September 2021
98
53
Ÿ
Be sure the electricity to the system
you are working on is isolated.
Ÿ
If the main supply power (live) is on,
it will cause damage to the
luminaire.
Ÿ
Ambient temperature:
Ta 36ºC
Ÿ
IP rating according to IEC 60598-1:
-Gear compartment: IP65
Ÿ
Mounting: In-ground installation
-Optical compartment: IP65
Ÿ
Control gear weight:
220V - 240 V
AC 50 Hertz
1
2
1. Selected the required position for the luminaire.
Create cavity in for plastic sleeve.
DO NOT PLUG
(CONNECT) WHEN
LIVE AS IT WILL CAUSE
DAMAGE TO THE
LUMINAIRE.
Bilux Inground
Remote Electronic Control Device
WARNING
ELECTRIC SHOCK
HAZARD
This equipment is to be
serviced by trained
personnel only.
50
Bilux Inground
Save These Instructions for Future Reference
Regent Lighting reserves the right to change specifications modify designs and discontinue items
without incurring obligation and whilst every effort is made to ensure that descriptions, specifications
and other information in this catalogue are correct, no warranty is given in respect thereof and the
company shall not be liable for any error therein.
TURN OFF POWER
AT CIRCUIT BREAKER OR FUSE AND TEST THAT THE POWER IS OFF BEFORE WIRING
WARNING:
TO AVOID FIRE, SHOCK OR DEATH
ALL LUMINAIRES SUPPLIED AND TO BE INSTALLED ABOVE AND BELOW 5 METERS ARE IN COMPLIANCE WITH
SANS 60598 SECTION 3.5.6 ACCORDING TO THE MANUFACTURER GUARANTEE AND WARRANTY
Electrical products can cause death, injury, or damage to property.
Installation of this product must be carried out by a qualified electrician,
in compliance with SANS 10142 or corresponding regulations of the
country of installation. On completion of installation, the Certificate of
Compliance must be updated.
For non user replaceable light source: The light source contained in this luminaire
shall only be replacedby the manufacturer or his/her service
agent or a similar qualied person
ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN
PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.
WARNING
Remote Electronic Control Device
ELECTRIC SHOCK
HAZARD
This equipment is to be
serviced by trained
personnel only.
