16
Regency I35 Gas Inbuilt Fireplace
Diagram 12
15)
Tuck the yellow wire into the thermodisc sleeve, see diagram 12. Cable
tie the top of the sleeve to ensure connector is secure in sleeve. See
Diagram 13.
Diagram 13
16)
Place the cable ties thru the cable tie holders in the heat shield to
secure loose wires. See diagram 14.
Diagram 14
17)
Secure the heat shield to the faceplate using 2 screws. See diagram
15.
Diagram 15
Yellow Wire
Diagram 11
14)
Connect the yellow wire originally connected to the On/Off switch to
the male wire on the thermodisc wires (included with kit). See diagram
11.
Male
Thermodisc
Wire
INSTALLATION
