Regency Horizon HZO42-NG, Инструкция для владельца и по установке

Страница: 28 / 48

28
Regency HZO42 (Aus) Gas Fireplace
installation
919-145
12.23.15 3
OUTDOOR 42
6) Manoeuvre remaining (B) pieces and position in each corner
of the frame - fl at side facing out - see 2 diagrams below.
7) LIne up screw holes on top / bottom (A) with each (B)- secure
with 3 wafer screws each on top and bottom - 6 screws in
total for each outer (B) (3 top- 3 bottom).
8) Position 4 - (C) pieces with the fl at side back to back with the
fl at side of each inner Part B as shown below. Secure each
(C) to bottom (A) with 3 wafer screws (one on each side and
one at top as shown below.
9) Position remaining 2 - (C) pieces offset from center rib as
shown below.
10) Position (D) on top of (C) pieces - line up screw holes and
secure (D) to (C) with 12 wafer screws.
11) Measure 1135mm from fl oor (bottom of the header location)
line up (E) (header) with appropriate screw holes.
(C)Screw
locations
1135mm
(E)
(D)
(C)
(B)+ (C) - fl at sides back to back
(C )
(B)
(A)