Regency Horizon HZO42-NG Скачать руководство пользователя страница 1

WARNING:  

If the information in these instructions are not followed exactly, 

a  fire  or  explosion  may  result  causing  property  damage, 

personal injury or loss of life. 

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapours and 

liquids in the vicinity of this or any other appliance.

Installation  and  service  must  be  performed  by  a  qualified 

installer, service agency or the gas supplier.

FOR YOUR SAFETY

What to do if you smell gas:

  Do not try to light any appliance

  Do not touch any electrical switch: 

do  not  use  any  phone  in  your 

building.

  Immediately call your gas supplier 

from a neighbour's phone. Follow 

the gas supplier's instructions.

  If  you  cannot  reach  your  gas 

supplier, call the fire department.  

FPI FIREPLACE PRODUCTS INTERNATIONAL LTD.  6988 Venture St., Delta, BC  Canada, V4G 1H4

918-976e

January 30, 2017

Owners & 

Installation Manual

Installer

: Please complete the details on the back cover 

and leave this manual with the homeowner.

Homeowner:

 Please keep these instructions for future reference.

MODELS: HZO42-NG 
                 HZO42-ULPG 

Regency HZO42 Outdoor

Gas Fireplace

WARNING: FOR OUTDOOR USE ONLY

 

www.regency-fire.com

WARNING:  

Improper installation, adjustment, alteration, service or maintenance can cause injury or property 

damage.  Read the installation, operating and maintenance instructions thoroughly before installing 

or servicing this equipment.

LISTINGS AND CODE APPROVALS

These gas appliances have been tested 

in accordance with  AS4565 / NZS 4558 

and  have  been  certified  by  the  IAMPO 

Oceana  for  installation  and  operation 

as  described  in  these  Installation  and 

Operating Instructions.

Your unit should be serviced annually 

by an authorised service person.

Содержание Horizon HZO42-NG

















































Отзывы: