20
Regency FG39-1 FireGenie Freestanding Gas Stove
LOG SET
INSTALLATION
Read the instructions below carefully and
refer to the diagrams. If logs are broken
do not use the unit until they are replaced.
Broken logs can interfere with the pilot
operation.
The gas log kit contains the following:
a)
02-65 Rear Log
b)
02-56 Middle Left Log
c)
02-44 Front Left Log
d)
02-46 Left Top Log
e)
02-45 Front Right Log
f)
02-47 Center Log
g)
02-48 Middle Right Log
h)
Embers
i)
Lava
Note: Install Optional Brick Panels prior to
installing logs.
Embers.
Embers
The "02" refer numbers (i.e. 02-65) are
molded into the rear of each log.
1)
Carefully remove the logs from the box and
unwrap them. The logs are fragile, handle
with care -
do not force into position.
2)
Sprinkle the embers on the left and right
sides of the firebox base.
INSTALLATION
C)02-44
Pins on Rear Log Support
A)02-65
B)02-56
3)
Place Rear Log A)02-65 on the two pins on
the rear log support.
4)
Place the Middle Left Log B)02-56 on the
two pins as shown.
5)
Sprinkle some lava rock just in front of B)
02-56 on the burner holes.
lava rock
B)02-56
6)
Place Front Left Log C)02-44 onto the 2
front pins as shown.
