30
Setting System Time and Date
A common system setup includes time and date as
one of the two-line messages that alternately display
on your touchpad LCDs. Your installer may have
programmed this for you.
If your system is programmed for Auto Arm,
resetting the time and date cancels Auto Arm times.
Your system can also be programmed for automatic
daylight savings time adjustments.
Set Time
1. Press
1 ENTR
+ any code (except Code 2).
2. Press
1
to select
Set Time
.
3. Enter digit(s) for the hour in 24-hour military
format, then press
ENTR
.
4. Enter digit(s) for minutes, then press
ENTR
.
5. Press
MUTE
to exit.
Example:
1 ENTR + code + 1
To change the time
to 3:45 p.m., enter:
1 5 ENTR
4 5 ENTR
Set Date
1. Press
1 ENTR
+ any code (except Code 2).
2. Press
2
to select
Set Date.
3. Enter digit(s) for the month, then press
ENTR
.
4. Enter digit(s) for the day, then press
ENTR
.
5. Enter four digits for the year, then press
ENTR
.
6. Press
MUTE
to exit.
Example:
To change the system
date to September 15,
1996, enter:
1 ENTR + code + 2
9 ENTR
1 5 ENTR
1 9
9 6 ENTR
Technical Manuals Online! - http://www.tech-man.com
