Regency 4734 Скачать руководство пользователя страница 12

Страница: 12 / 63

4734user.doc

indicates that some of the areas controlled by this
touchpad have not ready zones.

ARMED

- All areas controlled by this touchpad are armed.

OFF

- All areas controlled by this touchpad are

disarmed

FLASHING

- Some, but not all, areas controlled by this

touchpad are armed.

NO DELAY

- All areas controlled by this touchpad will generate

an alarm immediately.

OFF

- All areas controlled by this touchpad will not

generate an alarm until the programmed amount of time
has elapsed.

FLASHING

- Some, but not all, areas controlled by this

touchpad will generate an alarm immediately.

INTERIOR

- All areas controlled by this touchpad have interior

zones enabled.

OFF

- All areas controlled by this touchpad have

interior zones disabled. (But perimeter zones are
protected.)

FLASHING

- Some, but not all, areas controlled by this

touchpad have interior zones enabled.

CHIME

- The chime feature is enabled. A warning tone will

sound when anyone enters a chime zone. (The system is
disarmed in this case.)

Technical Manuals Online! - http://www.tech-man.com

Содержание 4734
































































Результаты поиска

Содержание 4734

Отзывы:

Бренды по названию

Популярные бренды

Regency 4734, Руководство пользователя

Результаты поиска

Содержание 4734

Отзывы:

Бренды по названию

Популярные бренды