background image

FPI FIREPLACE PRODUCTS INTERNATIONAL LTD.  6988 Venture St., Delta, BC  Canada, V4G 1H4

918-882k

01.15.17

Owners & 

Installation Manual

Tested by:

Installer

: Please complete the details on the back cover 

and leave this manual with the homeowner.

Homeowner:

 Please keep these instructions for future reference.

MODELS: HZO42-NG 
                 HZO42-LP 

Regency Horizon

®

 HZO42 Outdoor

Gas Fireplace

WARNING : FOR OUTDOOR USE ONLY

 

www.regency-fire.com

Horizon HZO42 Product Video

    WARNING:  

If the information in these instructions 

are not followed exactly, a fire 

or  explosion  may  result  causing 

property damage, personal injury or 

loss of life.

    WARNING - FOR YOUR SAFETY

What to do if you smell gas:

•Shut off gas to the appliance.

•Do not try to light any appliance.

•Extinguish any open flame.

•If odour continues, keep away from the appliance and im

-

mediately call your gas supplier or fire department.

•Do not touch any electrical switch: do not use any phone 

in your building.

•Immediately  call  your  gas  supplier  from  a  neighbour's 

phone. 

•Follow the gas supplier's instructions.

•If  you  cannot  reach  your  gas  supplier,  call  the  fire 

department.  

    WARNING:  

Improper  installation,  adjustment, 

alteration,  service  or  maintenance 

can cause injury or property damage.  

Read the installation, operating and 

maintenance instructions thoroughly 

before installing or servicing this 

equipment.
Installation  and  service  must  be 

performed  by  a  qualified  installer, 

service agency or the gas supplier.

     WARNING:  

Do not store or use gasoline or other flammable vapours 

and liquids in the vicinity of this or any other appliance. 

Содержание Horizon HZO42-LP





















































Отзывы: