background image

REGENCY FIREPLACE PRODUCTS INTERNATIONAL LTD.  6988 Venture St., Delta, BC,  Canada  V4G 1H4

919-379

11.03.14

Tested by:

Installer

: Please complete the details on the back cover 

and leave this manual with the homeowner.

Homeowner:

 Please keep these instructions for future reference.

E33  Gas  Insert

Owners & Installation Manual

MODELS:    E33-NG10 Natural Gas     E33-LP10  Propane

 

-  Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other 

appliance. 

- WHAT TO DO IF YOU SMELL GAS

 • 

Do not try to light any appliance.

 

•  Do not touch any electrical switch: do not use any phone in your building.

 

  Leave the building immediately.

 

•  Immediately call your gas supplier from a neighbour's phone. Follow the gas supplier's  

instructions.

 

• If you cannot reach you gas supplier, call the fire department.

 

 

 

- Installation and service must be performed by a qualified installer, service agency or the gas supplier.

     WARNING

FIRE OR EXPLOSION HAZARD

Failure to follow safety warnings exactly could result in serious

injury, death, or property damage. 

Содержание E33-LP10

































Отзывы: