Regency Fireplace Products Cascades F1150, Инструкция для владельца и по установке

Страница: 9 / 48

F1150 Regency Freestanding Woodstove
|
9
installation
Minimum Clearance to Combustible Materials
Please read the section below carefully as clearances depend on whether single wall or double wall pipe is installed on the stove.
Measurements "From Unit" are from the top plate of the stove to a side wall or to a corner, and from the rear heat shield to a back wall.
Clearances may only be reduced by means approved by the regulatory authority.
Note: Minimum ceiling height - 83" (2108mm)
Note: This clearance is also required for air space between the appliance and wall/ceiling.
B
A
D
E
F
F
C
C
NOTE: Be aware that local Codes and
Regulations may override some
clearances listed in this manual.
Check with your local inspector.
Residential Close Clearance (To be installed with required pipe components) Listed Double
Wall Pipe
When the stove is installed as a close clearance residential unit, a listed double wall connector is required from the stove collar to the ceiling level.
F1150 with Airmate or
Rear Deflector A B C D E F
11"
279mm
7"
178mm
5"
127mm
23"
584mm
13-9/16"
345mm
17"
432mm
Residential Installation "C" Vent (Single Wall Pipe)
F1150 with Airmate or
Rear Deflector A B C D E F
13"
330mm
10-1/2"
267mm
9"
229mm
25"
635mm
17-1/16"
433mm
21"
532mm
Mobile Home Close Clearance (To be installed with required pipe components) Listed
Double Wall Pipe
When the stove is installed as a close clearance residential unit, a listed double wall connector is required from the stove collar to the ceiling level.
Refer to Mobile Home Installation in this manual.
F1150 with Airmate or
Rear Deflector A B C D E F
11"
279mm
7"
178mm
5"
127mm
23"
584mm
13-9/16"
345mm
17"
432mm
ROOF EXIT
WALL EXIT
ROOF EXIT
WALL EXIT
NOTE:
Clearances to combustibles are for
the safety of the property. To avoid
overheating and damaging the
appliance these clearances should
be maintained for non-combustibles
also.