50
|
Regency Bellavista™ B41XTCE-10 Gas Fireplace
|
50
installation
FLUSH GLASS DOOR INSTALLATION
Diagram 3
Use the hook to pull the spring out until you can put the hook into the
slot on the bottom door bracket. Repeat for 2nd spring. See Diagram 3.
Diagram 2
The standard flush door
comes with a black frame. To install the frame,
simply hook the top door flange onto the top of the unit and swing the
door towards the unit, see Diagram 1.
Be careful that the glass gasket does not roll up; there must be a gap
between the gasket and the door lip to ensure that the door sits securely
on the unit, see Diagram 2.
Diagram 1
To remove the flush door, reverse the above steps.
MESH BARRIER
1.
To remove the mesh barrier, grasp mesh barrier on both sides from the bot
-
tom. Lift up and out slightly to release from bottom magnets and to release
hooks on mesh frame from brackets inside unit (see below).
Hooks on mesh barrier frame
2.
When hooks are clear of the bracket–tilt mesh frame out slightly from the
bottom and manoeuvre mesh out.
3.
To reinstall–reverse steps.
Содержание Bellavista B41XTCE-LP10
Страница 59: ...Regency Bellavista B41XTCE 10 Gas Fireplace 59 59 notes ...
Страница 60: ...60 Regency Bellavista B41XTCE 10 Gas Fireplace 60 notes ...
Страница 61: ...Regency Bellavista B41XTCE 10 Gas Fireplace 61 61 notes ...
Страница 62: ...62 Regency Bellavista B41XTCE 10 Gas Fireplace 62 notes ...
