Mounting of the Gate
Completely remove
hinge knob
Loosen all other
hinge knob(s)
Removing Extension Gate
STEP 1
If the standard gate is too long for your
opening you must remove either the right or
left extension gate. Loosen the hinge knob in
the clockwise direction. Slide the hinge knob
down and pull out the tube hinge. Do the
same with the tube hinge on the end with the
wall mounts.
STEP 2
Remove the hinge cover cap. Hinge cover
cap (H) is on the bottom of the hinge with
the wall mounts. Remove the toothed hinge
cap from the top.
STEP 1
Twist the hinge knobs in clockwise direction to
loosen.
STEP 2
STEP 3
Connecting The Panels
To Convert Into Play Yard
If the standard gate is too long for your opening you
must remove either the right or left extension gate.
Loosen the hinge knob in the clockwise direction.
Slide the hinge knob down and pull out the tube
hinge. Do the same with the tube hinge on the end
with the wall mounts.
Removing the Wall Mount: Panel 1
If the standard gate is too long for your
opening you must remove either the right or
left extension gate. Loosen the hinge knob in
the clockwise direction. Slide the hinge knob
down and pull out the tube hinge. Do the
same with the tube hinge on the end with the
wall mounts.
Removing the Wall Mount: Panel 2
Loosen the hinge knob in the clockwise
direction to disengage the locking teeth.
Slide the hinge knob and the toothed hinge
cap downward. Pull the tube along with the
hinge knob, toothed hinge cap, and wall
mounts away from the gate to release all
the parts. Remove the hinge cover cap from
the bottom of the 2 in 1 Super Wide™
Safety Gate.
STEP 4
