Regal RH40, Руководство пользователя

Страница: 21 / 90

21
§2.5 Display Window List
SET

Quick Start Windows solely to help the user get the flow meter up and running as
quickly as possible. They include instructions on preparing mounting
site, setting pipe parameters, setting fluid parameters, and setting
transducer parameters, followed by instructions on transducer
installation, verification, and diagnosis.
SET

Set Pipe Windows to set pipe parameters. This includes outer diameter, wall
thickness, inner diameter, pipe material, and pipe liner.
SET

Set Fluid Windows to set fluid parameters. This includes fluid type, sound speed,
and viscosity.
SET

Set Transducer Windows to set transducer parameters. This includes transducer type,
mount method, mount space, and scale factor.
SET

Set Filter Windows to set up filter parameters. This includes average filter, noise
filter, poor signal filter, and empty pipe.
LOG

Log Items Windows to set up data logging. This includes logging a basic set of 4
items, or logging all 16 items.
LOG

Schedule Windows to set up schedule for data logging. This includes logging
interval, start time, and stop time.
LOG

Save To Window to save logged data to a customary file name.
LOG

View Log Window to view any previously saved logged data.
LOG

Clear Log Window to delete a previously saved logged data.
CAL

Zero Window to set up zero calibration.
CAL

Linear Window to set up linear calibration. This includes manual totalizer and a
linear table.
CAL

0/4 – 20mA Window to verify that the output of the 0/4 – 20mA is accurate.
CAL

Temp Window to set up temperature calibration
M11 – M13

Site Windows to store, recall, and delete site parameters, respectively.
M21 – M24

Diagnosis Windows to display triplet, sound speed, transit time, and Reynolds time,
respectively.
M31 – M38

Input/Output Windows to change display settings, 0/4-20mA CL, OCT output, Relay
output, Frequency output, buzzer, alarm, and batch control, respectively.