Safety Considerations
The following definitions are used as safety considerations on the Evergreen
IM motor and in this manual. Please read and observe all
of these safety concerns.
SAfety SymbolS
Installation and service of this motor should be attempted only by
trained service technicians familiar with the Evergreen instructions
and training manual.
This motor should be installed in accordance with accepted practices
and installation instructions, and in compliance with all national and local
codes.
- 1 -
Warning indicates
a hazardous situation which, if not
avoided, could result in death or
serious injury.
Caution indicates
a hazardous situation which, if not
avoided, could result in minor or
moderate injury.
Always disconnect the main power from the unit being serviced before
making any wiring connections to the Evergreen IM. It is also a good
practice to confirm that the power is off with a meter.
Improper installation, adjustment, alteration, service, maintenance,
or use can cause explosion, fire, electrical shock, or other conditions
which may cause personal injury, death, or property damage. Consult
a qualified installer, service agency, or your distributor or branch for
information or assistance. The qualified installer or agency must use the
supplied or recommended parts when installing or servicing this product.
®
I
The Evergreen IM is a multi-purpose replacement indoor blower motor.
Proper wiring is critical to provide proper operation and maintain the
proper operation of all safeties built into the HVAC System.
The Evergreen IM is a multi-volt capable motor. Read all instructions and
install the proper jumper for the line voltage application before applying
power to this motor.
Use of the wires provided in this kit is recommended. Should additional
wires be needed, use equivalent size wire gauge and reated insulation.
Evergreen IM manual 01-13.indd 1
2/13/13 11:12 AM
