Regal Century EVQ165, Руководство по установке и инструкция пользователя, Страница: 14 / 20

14
The user can follow the below illustrations to operate Schedule Set Mode :
To enter Schedule Set
Mode PRESS and HOLD
button for 3 seconds then
release:
While in
Schedule Set Mode
light will blink quickly:
To set the desired schedule, PRESS the button the number of times as the
schedule number. For example, to set schedule 8 PRESS the button 8 times
and then PRESS and HOLD for 3 seconds, then release:
PRESS & HOLD for 3 Seconds
3 sec
1
∕
4
sec
1
∕
4
sec
NOT RUNNING
RUNNING (any speed)
RUNNING (high speed)
PRESS & HOLD for 3 Seconds
3 sec
PRESS
= CURRENT
SCHEDULE #
NOTE: To confirm the newly set schedule, the motor will automatically go
into
Schedule Check Mode
. Refer to section 4.4 for more information on
Schedule Check Mode . If at any time the motor does not enter Schedule
Check Mode after inputting the desired schedule, repeat the steps above.
Automatic exiting of Schedule Set Mode :
45 Seconds
Once you have the dip switches in the proper position, the user can then
select which of the 8 pre-programmed operating schedules they would like the
VGreen Evo™ motor to run in by entering Schedule Set Mode .