Regal 30 EXPRESS, Руководство пользователя

Страница: 190 / 234

29
Cosmetic Care & Maintenance
AVOID PERSONAL INJURY
AND PROPERTY DAMAGE!
ABRUPT TURNS ABOVE 30 M.P.H. MAY
RESULT IN LOSS OF CONTROL.
STEERING RESPONSE AT HIGH SPEEDS
CAN BE VERY SUDDEN.
ABRUBT TURNS MAY CAUSE YOU
TO CROSS YOUR OWN WAKE.
JUMPING A WAKE, SUDDEN TURNS, AND
INCREASES OR DECREASES IN SPEEDS
MAY BE DANGEROUS.
OPERATOR MUST MAKE SURE THAT ALL
PASSENGERS ARE SEATED SECURELY
BEFORE MAKING SPEED CHANGES.
SEACOCKS
Inspect the thru-hull seacocks before and after each
outing. Make sure the connections between the hose and
the valve are tight. Look for water leaks around the area
where the valve and hull meet.
Every 30 days open and close each thru-hull valve several
times. This will guard against the valve seizing in the open
or closed position. While doing this make sure the valve
handle is tightly fastened. Ensure that all seacocks are
closed upon leaving the vessel.
TYPICAL SEACOCK
OPEN
POSITION
CLOSED
POSITION
HANDLE
IN-LINE
TYPICAL SEA WATER STRAINER
WING NUT
STRAINER
BODY
Before servicing the sea water strainer make sure the
appropriate seacock has been closed to prevent water
from entering the boat. If possible blow out the strainer
basket with compressed air or use a metal type brush to
remove any material from the screening material. Make
sure the strainer is aligned in the center dimple on
reinstallation.
Check all parts for wear and possible leaks including any
gasket surfaces. Do not overtighten the strainer wing nuts
as this could cause strainer body and or gasket damage.
Use original replacement marine parts only. After all parts
are reassembled open the seacock and check for leaks.
Notice the drain hole in the bottom of the strainer body.
Take the appropriate steps to ensure the strainer is
winterized properly in colder climates.
CAUTION
!
STRAINER
BASKET
HANDLE
CENTER
DIMPLE TO
SET BASKET
DRAIN
HOLE