Regal 23 OBX, Руководство пользователя

Страница: 103 / 282

Engine & Controls
4-9
Battery Switch
All of your electrical systems onboard your Regal eventually connect
with your battery. This is where electrical power originates. In order
for any electrical systems to receive power, with the exception of your
automatic bilge pump function and stereo memory require the battery
switch to be turned “ON”. The two excluded systems have a direct
battery feed at all times without the use of the battery switch. The
battery switch connects the battery to all deck and engine circuitry. It
is important to turn your battery “ON” before each trip, and “OFF”
at the end of each cruise to avoid battery drain.
Never turn the battery switch to the “OFF” position when the engine
is running as alternator or other electrical system damage will occur.
Also, for extended non-use turn the battery switch to “OFF”.
The standard battery switch is located in the port sump. With the
stereo performance package option a 40 amp breaker protects the
system. A 50 amp breaker protects the circuit wiring up to the helm.
The stereo memory and the bilge pump fuses are located near the
battery switch box as reference below. The stereo memory fuse is 15
amps and the bilge pump fuse is 5 amps. These circuits will continue
to function even with the battery switch in the “OFF” position. It is
recommended to turn the red battery switch to the “OFF” position
when leaving the vessel for extended periods. See the equipment
chapter for further information.