11
MOUNTING DISTILLER
TO RESERVOIR
Simply set the distiller on top of
the reservoir tank. Your distiller
has been engineered to provide
a secure fit. When mounting
the distiller to the reservoir tank,
make sure that the water outlet
tube, located underneath the
distiller base, is directly above
the post carbon filter cup. This
will allow distilled water to flow
through the filter cup as it
enters the reservoir tank. Do not
install distiller closer than four
(4) inches (10 cm) to any
vertical surface. Maintain a
minimum clearance of fourteen
(14) inches (36 cm) to the top
of the distiller .
INSTALLING POST CARBON FILTER CUP
Your distiller uses a granular activated carbon (GAC) filter as a final polishing
agent to ensure cleaner, fresh tasting drinking water.
1) Place a prepared carbon filter (see page 7) into the supporting backet in
the corner of the reservoir.
2) Replace the post carbon
filter cup
every two months
or whenever an unusual
taste is detected in the
distilled water . The same
cleaning process should be
used whenever a new filter
is installed (see page 7).
Do
not attempt to re use
the old filter.
Filter Cup
Support Bracket
Louvered
Distiller
Cover
Prepared
Post Carbon
Filter Cup
Hinged
Cover
Float Ball
Distiller
Base
Resevoir
Tank
Resevoir T ank
