OPERATING YOUR HEATER
1. First turn on the Power switch on the right side of the heater.
You will hear a beep indicating power is
supplied to unit. The Power switch supplies power to all the function of the appliance. This switch must be in
“ I”
position for any functions including the remote control to work.
Press the Power button on the remote control, the heat and flame effect will be on. Press
the Power button again, heat and flame effect will be off. The fan will continue running
for 60 seconds to disperse remaining heat from inside.
2.
Setting timer to power-off
Press the Timer button to set timer-power-off function through control panel. Press the Timer button
to increase duration from 1h-2h-3h-4h-5h…….24h. The display panel will show 01-02-03-04-
05….24.
，
Press the Timer button to set timer-power-off function through remote controller. Press the Timer
button to increase duration from 1h-2h-3h-4h-5h…….24h. The display panel will show 01-02-03-04-
05….24.
3. Setting heat
When heater is off, press Heater button to start heater.
Press the Heater button on the control panel, the heater will start, it is High heating mode, The
display panel show OH, press it once again, it is Low heating model, The display panel show OL,
press the button the third time, the heater will be off, the fan will continue running for 60 seconds to
disperse remaining heat from inside.
Press the Heater button on the remote controller, the heater will start, it is High heating mode, The
display panel show OH, press it once again, it is Low heating model, The display panel show OL,
press the button the third time, the heater will be off, the fan will continue running for 60 seconds to
disperse remaining heat from inside.
~ 6 ~
