Regada Rematic STR 1PA Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 65

Regada Rematic STR 1PA Скачать руководство пользователя страница 9

STR 1PA, STR 2PA

7

1.8 Description

The

STR PA

electric actuator is controlled according to version

- by 24 V DC voltage fed to the electric actuator’s terminals according to the wiring diagram, resp. by

0/4/12 to 20 mA, 4 to 12 mA (0/2 to 10 V) )

- input control signal and provides for moving the output part of the EA automatically to a position

corresponding to the value of the input signal) and other functions as well

- through Modbus reso. Profibus communication interface

The electric actuator consists of these main parts (

Fig. 1, 1A

):

The electric actuator is driven by an

electric motor

(1)

supplied (single-phase motor) from the

source

board

(3)

and

control unit

(2)

of the DMS 3 electronics.

Position of output element of EA and thrust is scanned by

contactless absolute sensor.

Depending on the version, the DMS3 electronic circuit board may include

an electronic position

transmitter

(EPV) without power supply (passive) with output signal 4 through 20 mA.

Space heater (5)

is placed at the control board.

In case of power cut or damage of switches the actuator can be controlled by

manual handle

according to instructions stated in

chapter 4.

Service and Maintenance.

Basic modules of DMS3 electronic control system for STR PA:
Control unit (2)

– main part of system DMS3 – it contains microprocessor, 6 signal LED and 4 buttons

for simple adjustment and control of EA, connectors for connection of thrust scanner and sourcing
board and communication connector (connection to PC for adjustment and diagnostic), according to
version 2 free programmable relays R1 and R2,, 1 relay READY and terminals for electric
connection.

Sourcing board

for single-phase version

(3)

– secures power supply of electronic and provides an

output voltage of 24 V DC, 40 mA for the user, it contains user terminal board, switching circuits,
connector for connection with control unit.

Position scanning unit (4

) – secures contactless magnetic position scanning of output element.

Switching unit for 3-phase electric motors

- reversing relays, contactors or

contactless switching

(SSR).

Thrust reading unit (6) – provides contactless magnetic thrust reading.

LED display (7)

– shows instant position of EA output member and reports and displays potential

errors, which would occur when EA is operated. Signalling motion and failure of the EA is also
indicated by LEDs diode. LED display is used only pro type of construction EA without local
control.

Manual control:

made up by a handwheel with a worm gearing.

Other accessories – as optional accessories:

-

Module 3, or 6 additional relays (8).

- Local electric control module equipped with 2-line LCD display (fig. 7).

«
...
7
8
9
10
11
...
»

Содержание Rematic STR 1PA


































































Отзывы:

Нет отзывов