
10
EN
SPECIFICATIONS
AMPLIFIER OUTPUT
THD+Noise
(at 1dB below clip into 8Ω measurement bandwidth 22Hz to 22kHz) A-weighted
Bandwidth
(at 80W into 8Ω)
Input Sensitivity
(for 72W into 8Ω)
Output Sensitivity
(at rated inputs)
Line Inputs
10Hz (-1dB) to 65kHz (-3dB)
Line Inputs 2-5
164mV load 10k
Input D1
S/PDIF Isolated 0.5V 75Ω Co-axial
Dimensions (WxHxD)
432 x 82 x 340mm (17 x 3.25 x 13.4in)
Power Supply
AC supply 230V / 220V / 115V / 100V nominal ±10%
Fuse Ratings
T3.15 AL 250V - 230V 50Hz / 220V 60Hz
T5 AL 250V - 115V 60Hz / 100V 50/60Hz
Supported Sampling Rates
32, 44.1, 48, 88.2, 96, 176.4, 192kHz
THD+Noise (DAC Output from Tape Out)
Typically 0.004% at 1kHz
Pre-amplifier Output
625mV
Line Inputs
Typically 0.005% at 1kHz
Phono Input
15Hz (-3dB) to 65kHz (-3dB)
Phono Input
1.6mV load 47k in parallel with 220pF
Record Output
164mV
Input D2
S/PDIF Optical Toslink
Supported Bit Depths
16 to 24 bit
Weight
11kg (24.3lbs)
Power Consumption
250W at 1dB below clip into 8Ω
Remote Batteries
AAA (1.5V) x 2
Power Amplifier Gain
31.6dB
RIAA Accuracy
Better than ±0.5dB 100Hz to 20kHz
Preamplifier Output
Typically 0.002% at 1kHz
Power Amplifier Output (at rated 230/115V supply voltage)
72W per channel into 8Ω
90W per channel into 6Ω
Note:
Continued high level use into loads of 6Ω or less may cause
the case to exceed 40°C above ambient temperature and activate
the thermal shut down.
Headphone Output
No Load
11.3V
300Ω
8.1V
54Ω
3.6V
32Ω
2.4V
Source Impedance
109Ω
DISTORTION
FREQUENCY RESPONSE
SENSITIVITY
DIGITAL INPUTS
DIMENSIONS AND WEIGHT
POWER
Содержание ELEX MK4
Страница 1: ...ELEX MK4 INTEGRATED AMPLIFIER ...
Страница 65: ...65 ELEX MK4 ...
Страница 66: ...66 ...
Страница 67: ...67 ELEX MK4 ...