Refu sol PV Heater DCLV, Инструкция по эксплуатации и монтажу

Страница: 39 / 44

BA_AE_PV Heater_V02.6_EN
39
13 Technical Data
Technical data PV Heater DCLV
Art. No. 401R1K5
ELECTRICAL DATA
Recommended max. PV Power
2,7 kWp
Heat output 1500 W
MPPT Range 18 … 42 V
DC Start Voltage 16 V
Maximum DC Voltage 50 V
Max DC Power 3 x 20 A, Overcrowding up to 30 A permitted
Recommended Type of module 60, 66 or 72 cells, mono or poly
MPP- Trackers
3
Number of DC connections 3 x Spring terminal 2,5 - 6 mm
2
Max / Europ. efficiency >99 %
From production / Consumption Night 2 W / 0 W
ENVIRONMENTAL CONDITIONS
Cooling
natural convection
Ambient temperature
-25... +50 °C, De-rating 4 %/K till 70 °C
Air humidity
> 95 %, Condensation not allowed
Altitude, m above N.N
4000 m above N.N
Noise
< 35 dBa
Storage temperature
-25 – 60 °C
STANDARDS AND APPROVALS
Product standard EN60335-1, EN60335-2-21, EN60730-1
EMV EN 61000-6-3, EN 61000-6-2
Internal over voltage protection, type Type 3 (after EN 61643-1)
Protection class III (after IEC 62103), PELV
Over voltage category DC: II (after IEC 60664-1)
Certificates
CE
MANAGEMENT AND COMMUNICATION
Interfaces
6 Status LED, 1 digital input, Ethernet, 1 x
changeover contact (5A, 30V DC).
2 external PT1000 sensors
Monitoring
integrated data logger, Power meters, AE SiteLink
(REFUlog)
Maximum heating temperature and security
boundary Shutdown at 85 ° C.
configurable up to 80 ° C
MECHANICAL DATA HOUSING
Type of protection IP21 after EN 60529
Dimensions width/height/depth, mm 210 x 235 x 90
Weight, kg
1,7
MECHANICAL DATA AE immersion heater
Material heater rod High nickel iron chromium alloy
Maximum operating pressure
10 bar
Unheated area
100 mm
Dimension length / Diameter
400 mm / 40 mm
Connection thread
1 ½”
Fitting length
14 mm
Use
Hot water treatment
Weight
1,0 kg