Reflexion LDDW19i+, Руководство пользователя

Страница: 59 / 75

EN
59
Blue button: Start the search on a selected transponder or
satellite. The existing station list is deleted.
Satellite setting (LNB
setting)
Note:

Normally, no adjustment has to be made in the LNB
settings. The setting is only recommended for
experienced users.

Select the desired Satellite and press the button to
get to the LNB setting.
LNB Type: Set the setting based on your LNB.
LNB Power: Set the LNB voltage for the horizontal / vertical
switching.

13V / 18v.

Off
22Khz: Control signal for low / high switching.

Auto

On

Off
Unicable Setting: Set the Unicable setting according to your
Unicable satellite system.

IF frequency: Select the IF (ID) corresponding to your LNB
or multiswitch and enter the frequency.

Satellite position: Select satellite position: SatA, SatB
Burst: Set the tone burst on or off according to your satellite
system.
DISEqC 1.0: Only active when DISEqC 1.1 is switched off. Set the
LNB based on your multiswitch configuration.
DISEqC 1.1: Only active when DISEqC 1.0 is switched off. Set the
setting based on your LNB / multiswitch configuration.
DISEqC 1.2: Motor settings. Activates the Limit Settings menu
item.
Motor Setting: Only active when DISEqC 1.2 is set to On. Set the
position settings for the satellite.
CI Information
Displays information about the inserted CI module and the card.
Only active when a module is inserted. The module and card are
not included in the scope of delivery and must be purchased
separately from the reception provider.
Signal Information
Shows reception information of the selected station. Only active
if a station has been found.
DVB-T
Auto Search
Starts the automatic station search.
Country Select: Select the country according to the installation
site.
Search Type: select the search type.

ATV / DTV