39
REMOVING OF USB / MEMORY CARD
To remove a USB storage medium, switch off the HIF-1937 device. Now pull the
USB stick out of the
USB SOCKET (13)
.
Adjustment turntable
There is a possibility that with some plates the device stops too soon or not at all,
which unfortunately has to do with different standards of the plate industry. If you
have such an incident, we would like to give you the opportunity to adjust the
turn-off of the turntable according to your record. You will need a Phillips
screwdriver. Remove the "Service Only" sticker from the back of the device and
adjust the screw as shown in Figure 1.
NOTE:
Before adjusting, shine a flashlight in the opening to remove the
screw.
The screw is located slightly to the right behind the opening. Use a
screwdriver to move it from the left, slightly obliquely to the right, as
shown in Figure 1.
NOTE:
Before adjusting the turntable end point, please turn the assembly
screw on the right above the turntable counter clockwise until you
notice resistance.
