Reflexion HIF1897T, Руководство пользователя

Страница: 36 / 39

EN
36
Note:

Before adjusting, shine a torch
into the opening to identify the
screw.

The screw is located slightly to
the right behind the opening.
Use the screwdriver to enter the
opening from the left, slightly
diagonally to the right, as shown
in Figure1.
Note:

Before adjusting the turntable
end point, please turn the
assembly screw to the right
above the turntable
counter-clockwise until you
notice resistance.
IMPORTANT:

Do not unscrew the screw
completely.

If you have adjusted the platter,
please do not forget to turn the
assembly screw back in
counter-clockwise.
Vinyl does not run to the end:
1. If the turntable switches off too early and the tonearm retracts, carefully turn
the screw 45 ° clockwise.
2. Check the setting with a vinyl record.
3. If the turntable switches off too early again, repeat the above step until the
end point matches your record.
Phono does not switch off automatically after the end:
1. If the turntable does not switch itself off automatically after the end of the
record, carefully turn the screw 45 ° counterclockwise.
2. Check the setting with a vinyl record.
3. If the turntable does not switch off automatically after the end of the record,
repeat the above step until the end point corresponds to your record.