3
CAUTION:
USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULTE IN HAZARDOUS RADIATION EXPOSURE.
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE
PERSONNEL.
PRECAUTIONS FOR USE
INSTALLATION
UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS
AROUND THE UNIT FOR VENTILATION.
CONNECTION
CONNECT THE USB CABLE WITH THE USB PORT (6) OF THE UNIT AND COMPUTER, THEN THE UNIT WILL BE
POWERED BY THE USB PORT.
PHONO & ENCODING
NOTED:
-
REMOVE THE STYLUS PROTECTOR.
-
BE SURE THAT THE TONE ARM IS BEING DETACHED FROM THE TONE
ARM REST BEFORE OPERATING AND RE-SECURED AGAIN AFTERWARDS.
1. PLACE THE RECORD ON THE PLATTER (USE THE 45 RPM ADAPTOR IF
REQUIRED).
2. PUSH THE LIFT LEVER (2) UPWARD TO RAISE THE TONE ARM FROM THE ARM PARK,
AND THEN SLOWLY MOVE IT TO THE RECORD SIDE. THE PLATTER WILL START TO
ROTATE.
3. PUT DOWN THE LIFT LEVER (2) TO DROP THE TONE ARM AND TOUCH THE RECORD
GENTLY. PHONO PLAYING STARTS NOW.
4. PUSH THE LIFT LEVER (2) UPWARD TO RAISE THE TONE ARM FROM THE ARM PARK, NOW PLATTER
WILL STILL BE ROTATING BUT PHONO PLAYING WILL STOP. TO CONTINUE THE PLAYING, USER NEEDS
TO PUT DOWN THE LIFT LEVER (2).
5. AT THE END OF RECORD, THE PLATTER WILL AUTOMATICALLY STOP ROTATING. PUSH THE LIFT LEVER
(2) UPWARD TO RAISE THE TONE ARM AND MOVE IT TO THE ARM PARK, AND THEN PUT DOWN THE
LIFT LEVER (2).
6. TO STOP MANUALLY, LIFT THE TONE ARM FROM THE RECORD AND RETURN IT TO THE ARM PARK.
REMARK
: AS SOME KIND OF RECORD THE AUTO-STOP AREA WAS OUT OF THE UNIT SETTING, SO IT WILL
STOP BEFORE THE LAST TRACK FINISHES. IN THIS CASE, SELECT THE AUTO-STOP SWITCH (3)
TO “ OFF
“ POSITION, THEN IT WILL RUN TO THE END OF THE RECORD BUT WILL NOT STOP AUTOMATICALLY (TURN
OFF THE UNIT BY UNPLUGGINT USB CABLE OR EXTERNAL POWER TRANSFORMER OR SWITCH BACK THE
AUTO-STOP SWITCH (3)
TO “ ON “ POSITION TO STOP THE PLATTER ROTATE). THEN PUT BACK THE TONE
ARM TO THE ARM PARK.
LINE OUT SOCKET
-
THIS SYSTEM CAN BE CONNECTED WITH EXTERNAL DEVICE (EG. AMPLIFIER AND
SPEAKER) BYRCA LINE OUT SOCKET (7) AT REAR CABINET FOR MUSIC PLAYBACK
Digitalising__________________________________________________________________
1. THE SYSTEM CAN CONVERT AUDIO SOURCE FROM TURNTABLE TO COMPUER BY CONNECTING THE
USB PORT AT BACK PANEL WITH COMPUTER.
2. CONNECT THE PRODUCT TO A COMPUTER VIA USB CABLE
3. INSERT THE SOFTWARE CD AND FOLLOW THE ON-SCREEN INSTRUCTION. THE CD INCLUDED
AUDACITY 2.0, WHICH CAN BE SUPPORTED BY WINDOW 2000/XP/VISTA 7 (WINDOW VERSION) AND
MAC OS X 10.4 OR LATER (MAC VERSION).
4. YOU CAN FIND FURTHER INFORMATION ON THE SOFTWARE IN THE HELP MENU AND IN THE
OPERATING INSTRUCTION OF THE SOFTWARE. THERE ARE AVAIALBE AT THE FOLLOWING LINK:
http://audacity.sourceforge.net/help/documentation
