Reer SAFEGATE M SG BOX RST, Инструкция по эксплуатации

Страница: 6 / 8

M SG BOX RST www.reersafety.com
8541290 01 • 24/03/2020 • Rev.0
13
SIGNALS
SIGNAL CONDITION MEANING
OUTPUT STATUS
(White)
ON Outputs active
OFF
(Low intensity blinking)
Light curtain occupied: outputs disabled
SAFETY RELAYS TECHNICAL DATA
The M SG BOX RST module uses two safety relays with guided contacts for the output circuit.
These relays are specified by the manufacturer for voltages and currents greater than those indicated
in the technical data; nevertheless to guarantee correct insulation and avoid damage or premature
aging, protect each output line with a
3.15 A delayed fuse and verify that the features of the load
conform to the indications on the following table.
TECHNICAL DATA
Number of contacts 2N.A. - 1N.C.*
Relay category (according to
EN60947-5-1)
AC15 / DC13
Max commutable voltage
250Vac, 24Vdc
Min commutable voltage 10Vac/10Vdc
Max commutable current 2A
Min commutable current 10mA@24Vdc
Number of commutations (life)
> 50 x 10
3
(el) / > 40 x 10
6
(mech)
* 1N.C. = DO NOT USE AS A SAFETY CONTACT
MECHANICAL DIMENSIONS
All dimensions are expressed in mm