Reer ADMIRAL AX BK, Инструкция по установке, эксплуатации и обслуживанию

Страница: 18 / 41

8540581 - 29/09/2010 - Rev.10
17
2.
Mode B2: (Figure 15)
•
With all the beams free, the mobile object is missing, therefore the outputs are de-
activated. The letter “b” indicating that the outputs are de-activated due to the absence of
the mobile object is shown on the display of the receiver.
•
With one beam occupied, the mobile object is present (blanking active and outputs ON).
•
With two or three
adjacent
beams occupied (except for the synchronism beam), the area
is considered free (tolerance of ±1 beam).
•
With two or more
non-adjacent
beams occupied, the area is considered occupied.
CURTAIN occupied free free occupied free occupied
STATUS
Figure 15
Nominal resolution Type of Blanking Effective resolution at the edges of the blanking area
No blanking 14 mm
Floating blanking B1 16 mm
14 mm
Floating blanking B2 26 mm
No blanking 20 mm
Floating blanking B1 20 mm
20 mm
Floating blanking B2 30 mm
No blanking 40 mm
Floating blanking B1 60 mm
40 mm
Floating blanking B2 90 mm
Nominal resolution Type of Blanking Minimum detectable object
No blanking 90 mm
Floating blanking B1 140 mm
90 mm
Floating blanking B2 210 mm
Table 8 - Blanking With Object Presence Obligation
Calculate the safety distance S following the formula of page 8 using the D value
obtained from table 8.