8541468 • 15/12/2021 • Rev.0
15
MOSAIC M1S COM - MASTER MODULE
E
n
g
li
s
h
INSTALLING THE SOFTWARE
PC HARDWARE REQUIREMENTS
•
RAM: > 2 GB
•
Hard disk: > 500MB of free space
•
USB connector: 2.0 or higher
PC SOFTWARE REQUIREMENTS
•
Windows 7 with Service Pack 1 installed (or higher OS).
•
Microsoft Framework 4.8 (or higher).
INPUTS
USB CONNECTOR
MOSAIC Master MOSAIC M1S COM comes with a USB 2.0 type C connector
for the connection to a PC that is hosting the configuration software (MSD
Safety MOSAIC Designer).
MOSAIC CONFIGURATION MEMORY (MCM)
A backup memory, called MCM (optional) can be installed in the MOSAIC
master MOSAIC M1S COM and used to save the SW configuration
parameters.
The MCM is written each time a new project is sent from the PC to the
MOSAIC M1S COM.
➔
Connect/Disconnect MCM only when MOSAIC M1S COM is turned off.
RJ45 CONNECTORS
MOSAIC master MOSAIC M1S COM is equipped with two RJ45 connectors
for fieldbus connection and/or remote connection.