6
Channel Number
The channel number must be the same for both units
.
There are 9 possible settings, for the baby unit
b 1
to
b 9
and for the parent unit
P 1
to
P9
.
1 to 9 stands for channel combinations programmed ex factory between PMR 446 radio
channels and CTCSS encoding. The numbers are only valid for this type of transceiver and
there is no communication with other baby monitors!
Set Channel
•
Briefly press the
MENU
button once. The set channel will flash.
•
Press
to select a different setting.
•
Press the PTT button to confirm or simply wait a few seconds.
Set Baby Monitor Sensitivity
You can set the sensitivity of the baby unit in 4 levels.
With initial installation the unit is set to level 4
•
Briefly press the
MENU
button three times to access the
VOX
menu.
The display shows the sensitivity setting as a number on the right (between
1
and
4
).
Press
to select a level between
1
and
4
.
1
setting for highest distance from the baby cot
2
medium sensitivity setting
3
low sensitivity setting
4
highest sensitivity setting (default setting) with additional talkback function
We recommend level 4 as start position. If your baby cries for a longer period without
breaks you may want to talk to your baby to calm it down. For this set the baby unit to
level 4 to allow you after 20 seconds of transmission to talk back for 10 seconds.
•
Use these 10 seconds to talk to your baby and calm it down.
•
Simply press the
PTT
button
on the parent unit and talk to your baby.
As long as your baby is quiet you can speak from the parent unit at any time (if the
volume on the baby unit is not set to
00
).
