5
Prepare As Baby Monitor
It only takes one simple programming step after inserting and charging the battery
pack to determine which unit will serve as the baby unit and which one as the parent
unit.
•
Turn one unit on (press the On/Off button
for 3 sec).
•
Press the MENU button twice.
The display shows the baby icon
and
OF
.
•
Press
on the baby unit to select
b
(on the other unit select
P
(=
parents).
•
Briefly press the
PTT
button
to confirm, or simply wait a few seconds.
The babysitter setup is completed.
Now the display shows the baby or parent channel top left, such as
b1
and the baby icon
bottom center.
This setting already includes the highest sensitivity setting for the baby unit, automatic
out-of-range control between baby and parent unit, the possibility to test the range and to talk to
the baby.
What Else Can Be Set?
Volume
•
Press
to set the volume.
The display shows the volume setting in steps between
LE 00
and
LE 09
.
The volume setting is important in case you want to talk to the baby. Set the volume level to
LE
00
to mute the baby unit at all times.
Set the volume level for the parent unit to the desired level.
Display Alarm
The parent unit with muted speaker (set to
LE 00
) still lights up to show that the baby unit is
communicating.
•
The
display backlight
turns on for approximately 5 seconds with every alarm.
