- 10 -
To mount the gate, open with the handle,
fig. 20
. For this purpose, press the 2 buttons on both
sides and simultaneously lift the handle. To open, both buttons must be pressed gently and
simultaneously! Adjust the lower adjustment screw so that the hinge support
(m)
easily and freely
lowers,
fig. 21
. Now adjust the adjustment screw in the handle until the head of the adjustment
screw has a distance of 3 - 4 mm from the opening surface,
fig. 22
.
Mount the support shell
(f)
between the head of the adjustment screw and the wall, mark the
position and screw on the support shell with a wood screw
(k)
,
fig. 23
. Now tighten the nuts of
the three fastening screws using the provided screwdriver
(o)
, respectively tighten the hand
wheel on the fastening screw of the closure. Your gate is ready for use.
To lift the handle, gently press both buttons simultaneously. Gently lift the handle from the back /
bottom. If the buttons are pressed too hard, this complicates lifting the handle. Lift the door out of
the lower hinge support and open wide,
fig. 24
.
When closing the gate, please check if the adjustment screw is inserted in the bracket of the lower
hinge support. Then insert the screw head in the closure by lowering the handle to the support
shell. Always ensure that the fastening screws are inserted in the top and the bottom correctly.
Regularly check the safety of the mounting, static stability and locking function. Adjust according to
the indications in the instructions subsequently.
Please keep the sales receipt, operating manual and article number in a safe place.
All claims based on warranty or guarantee are to be directed solely towards the retailer.
Step 7
Öffnen
des Gitters
Schließen
des Gitters
Note
Accessories
// optionally available
StairFlex
Art. No. 46906
Suitable for all clamping and screwed gates.
Solves almost every installation problem with stair railings. Installation on round or angular railing
struts possible.
Information
English (EN)
Содержание 46115
Страница 45: ...43...