manualshive.com logo in svg

Reely TQ Performance Drone RtF, Руководство по эксплуатации

Поделиться
Скачать
Reely TQ Performance Drone RtF Скачать руководство пользователя страница 10

10

9. Using the transmitter

  The numbers used in these instructions refer to the figure alongside the text or the figures within the re

-

spective section. Cross-references to other figures are indicated with the corresponding figure number. 

a) Inserting the batteries

Three AAA/Micro batteries are required to power the transmitter (not included and must be ordered separately).

 Important!

 

Use only standard batteries (1.5 V/cell) and not rechargeable batteries (1.2 V/cell) as the power supply for 

the transmitter. 

To insert the batteries, proceed as follows:

Press the grooved surface (1) of the battery compartment 

cover (2) and slide the cover downwards. 
Insert 3 AAA/Micro type batteries with correct polarity fol-

lowing the instructions on the bottom of the battery com-

partment (3). 
The tongue-shaped spring contact (4) must always be 

connected to the minus pole of the battery.
Replace the battery compartment cover (2) and push it 

upwards until it clicks into place.

Figure 2

Содержание TQ Performance Drone RtF

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды