23
10. Maintenance and Care
Regularly check the state of the drive rubber and powder it with talcum if required.
Repair breaks at your model with materials-compatible glues, such as two-component epoxy-resin or instant glue
suitable for hard foam.
The outside of the model should only be cleaned with a soft, moistened cloth. Never use aggressive cleansing agents
or chemical solvents, since this might damage the surfaces.
11. Disposal
At the end of its service life, dispose of the product according to the relevant statutory regulations.
12. Technical Data
Wing span ............................ 475 mm
Length .................................. 380 mm
Weight .................................. Approx. 37 g
