Reely Rocket Drone FPV, Руководство по эксплуатации

Страница: 25 / 44

25
17. Headless mode
In headless mode, the quadcopter always moves in the direction of the remote control levers, regardless of its orienta-
tion. For example, when you move the control lever to the right, the quadcopter will always move to the right (regard-
less of which direction the quadcopter is facing). In this mode, you can move the right-hand lever (pitch and roll) in the
direction in which you wish the quadcopter to travel.
Important!
The remote control and quadcopter must be aligned when headless mode is enabled. Headless mode can
therefore only be enabled when the quadcopter is on the ground. The quadcopter should be aligned so that
the (green) LEDs are on the back of the quadcopter. If you fail to observe these instructions, the quadcopter
may not respond as expected and may travel in a different direction.
Headless mode is controlled using relatively simple technology (without a compass or GPS). As a result, it
is normal for the quadcopter to deviate from the desired direction of travel.
When the quadcopter is not in headless mode, you need to consider the orientation of the quadcopter (e.g. the quad-
copter is travelling towards you and you move the lever to the left, but the quadcopter moves to the right). In headless
mode, you do not need to consider the orientation, which makes the quadcopter easier to control for beginners.
However, if you wish to learn how to fly a quadcopter in the standard configuration, you should avoid using headless
mode and learn how to fly the quadcopter in the standard mode.
To enable headless mode, pair the remote control with the quadcopter
(prepare the quadcopter for take-off). The rotors are still off when headless
mode is enabled for the first time. Align the quadcopter on the ground so
that the remote control points towards the green LEDs on the back of the
quadcopter (see figure 18).
Press the "headless mode" button (figure 7, position 8) until you hear two
beeps.
The LEDs on the quadcopter will flash rapidly to indicate that headless mode
is enabled.
Start the quadcopter.
When headless mode is enabled, the quadcopter will always move in the
direction of the right-hand lever (regardless of the quadcopter's orientation).
For example, when you move the lever forwards, the quadcopter will always
move away from you. When you move the lever to the right, the quadcopter
will always move to the right.
To disable headless mode, press the headless mode button (figure 7, position 8) until you hear a beep. The LEDs on
the quadcopter will stop flashing to indicate that headless mode is disabled.
Figure 18