13
b) Charging the quadcopter battery
Use a USB power adapter or USB cigarette lighter (not included) to power the USB charger. This must be able to
deliver an output current of at least 1000 mA.
A computer USB port or a USB hub with a its own power adapter is not recommended, as the current con-
sumption (approx. 1000 mA) may exceed the maximum current of a port. This would damage the computer.
Open the battery compartment cover and remove the
quadcopter battery (see figure 2).
Insert the USB plug on the USB battery charger into the
USB power supply (e.g. a USB power adapter).
Insert the small connector on the USB charger into the
corresponding socket on the rechargeable battery (see
figure 3). Ensure that you insert the connector in the cor
-
rect orientation (align the connector with the socket on the
battery).
Charging will begin provided that the battery is not defec-
tive (high impedance/disconnected) and the charger is
connected to a power supply. The red LED indicator on
the USB battery charger lights up to indicate that the bat-
tery is charging.
LED indicator status:
LED on:
Battery is charging
LED off:
The battery is full/fully charged
When the battery is fully charged (LED on the USB charger switches off), disconnect the battery from the charger and
insert it into the battery compartment on the quadcopter.
The battery should be connected to the quadcopter before take-off.
Figure 2
Figure 3
Содержание Rocket Drone FPV
Страница 1: ...Operating Instructions Electrical quadrocopter Rocket Drone FPV RtF Item No 1646409 ...
Страница 41: ...41 ...
Страница 42: ...42 ...
Страница 43: ...43 ...