12
Wichtige Anmerkungen:
•
Wenn das Fluggerät nach ausgelöster RTH-Funktion zurückfliegt, kann es keine Hindernisse meiden.
•
Das Fluggerät kann nicht zur Rückflugposition zurückkehren, wenn der GPS-Empfang schwach oder nicht
vorhanden ist.
•
Wenn das Fluggerät bei aktiver RTH-Funktion über 30 Meter hoch fliegt, startet das Fluggerät die RTH-Funktion
sofort. Wenn es unter 30 Metern fliegt, steigt es automatisch auf 30 Meter Höhe und startet danach den
RTH-Vorgang.
•
Wenn das Fluggerät kein Satellitensignal empfängt oder das Signal der Fernsteuerung bleibt weiterhin länger
als 2 Sekunden aus, kann das Fluggerät den Rückkehrflug nicht antreten, sodass es langsam sinkt und landet.
5.4 Fluggeräte-LEDs und Statusanzeigen
a
b
a. Statusanzeige für die optische Positionierung - LED
Blinkendes rotes Licht
Störung der optischen Positionierung
Rotes Dauerlicht
Bei optischer Positionierung
b. Flugstatus-Anzeige - LED
Blaues Dauerlicht beim Start
Selbsttest
Grünes Dauerlicht
Fernsteuerung und Fluggerät sind gekoppelt,
GPS-Signal gefunden
Grünes Blinklicht
Fernsteuerung und Fluggerät sind gekoppelt,
GPS-Signal nicht gefunden
Rote und blaue LED blinken abwechselnd
Horizontaler Kalibriervorgang
Rote und grüne LED blinken abwechselnd
Vertikaler Kalibriervorgang
Blaues Blinklicht
Fernsteuerung und Fluggerät sind nicht gekoppelt,
GPS-Signal nicht gefunden