• Ensure that only a qualified electrician installs/services this
equipment.
•
• Ensure that power supply voltage does not exceed maximum
voltage rating of reel.
•
• Ensure that all electrical power is removed from reel before
servicing.
•
• A high-tension spring assembly is contained within the reel.
Exercise extreme caution.
•
• Check for frayed and/or broken wires before each use. Pull
electrical cord from reel by grasping the electrical cord itself,
not the work device.
•
• If an electrical malfunction should occur, remove power from
reel immediately.
• Ensure that reel, electrical cord, and equipment being serviced
are properly grounded. Use an ohmmeter to check ground
continuity.
•
• If reel ceases to unwind or rewind, remove power immediately.
Do not pull or jerk on electrical cord!
•
• Treat and respect the reel as any other piece of machinery,
observing all common safety practices.
•
• All cord reels with flying leads must be hard wired into the
electrical circuit to ensure proper function.
•
WARNING:
Even low voltage can cause irreparable damage or
death! Exercise extreme caution while operating or servicing this
equipment.
SAFETY
Personal injury and/or equipment damage may result if proper safety
precautions are not observed.
Read this manual carefully before installing,
operating or servicing this equipment.
IMPORTANT
Operating Instructions
Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725
Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605
Customer Service: 855-634-9109 • [email protected] • www.reelcraft.com
Form# 1287-916 Rev: 4/2017
Dimensions
A
20 1/4”
B
19 3/4”
C
7 7/8”
D
3 7/8”
E
12 1/2”
Series L 70000 Spring Driven Cord Reels
Model Numbers:
L 70075 123 3
L 70100 123 7
L 70075 123 X
L 70100 123 3
L 70075 123 7A
L 70075
L 70075 123 3A
L 70100 123 7A
L 70100 123 X
L 70100 123 3A
L 70075 123 9
L 70100
L 70075 123 3B
L 70100 123 9
L 70100 124 X
L 70100 123 3B
L 70075 123 9G
L 70100 124
L 70075 123 7
L 70100 123 9G